Precautions for the use of stone engraving machine

In the process of using the stone engraving machine for a long time, it will inevitably lead to PM2.5 pollution such as dust accumulation, which will affect the health of operators. There will also be a lot of dust in the workshop, which will affect the normal use of electrical appliances and also cause damage to components. In addition, try to maintain a constant temperature environment during use. Only in a constant temperature environment can the normal operation be effectively guaranteed. Generally, the temperature should be guaranteed to be around 40 degrees to 45 degrees, which is more critical.

It should be ensured that the stone tablet engraving machine is used without power failure. During the operation, the water temperature at room temperature should be guaranteed to be at least 5~10 degrees, so as to ensure that the coolant will not freeze, and it will always be able to maintain circulation. condition. When choosing antifreeze, you also need to pay attention to the local temperature. It does not mean that the lower the freezing point, the better. If the local temperature is relatively low, you should choose antifreeze that is slightly lower than the local temperature. In general, it is recommended to use professional Brand antifreeze, the ratio of adding is 30% antifreeze, plus 70% water.

 

When choosing a CNC stone engraving machine, you also need to consider your own needs, such as the thickness of the material to be cut, or the factors that need to be cut which are different will also affect the power of the purchased equipment. Generally, manufacturers will combine the customer's requirements. needs to match. When purchasing a CNC stone engraving machine, you also need to pay attention to the choice of power. Higher power means that the cutting speed can be increased, and thicker plates can be cut, but the selection of power also needs to be combined with the running scene.